Car Nitrous Oxide Kit - Car Nos Kit

Do it Yourself Nitrous Kits - DIY Nos System

Universal WET nitrous oxide kits ( Nos Kit ) that can easily be applied to any make or model of car.

Not all Nitrous Oxide ( NOS Systems ) perform the same although many use the same components available from the relevant manufactures but only the Wizards of Nos kits use high quality components that are specifically designed in-house to be the best for nitrous performance use as they are purpose designed and produced solely for nitrous use.

These Nitrous kits are all manufactured in the UK and are fully tested and are by far the most superior NOS System available for reliability and performance in the world. The Wizards of Nos Nitrous Systems have been featured on Top Gear and Fith Gear TV Shows so this confirms and speaks for its self.

THE ULTIMATE IN NITROUS SYSTEM DESIGN AND TECHNOLOGY!

UNRIVALED list of standard features supplied with our Nos Kits.

• Anodised billet alloy Pulsoids.
  
• Pulsoids that NEVER wear out, guaranteed.
  
• Extruded alloy bottle bracket.
  
• Anodised billet alloy bottle valve body.
  
• Anodised billet alloy valve handwheel.
  
• Stainless steel fittings.
  
• Polished SS component mounting bracket.
  
• NO purge required.
  
• Lifetime Warranty.
  
• 24/7 tech support.
  
  Specs: Pulsoids(solenoids)
  
• Only pulsoids(solenoids) designed and built to pulse accurately and reliably.
  
• Cooler running with more reliability.
  
• Optimum port location for greater flow & maximum power to size ratio.
  
• Matched hi-tech thermo plastic seat and plunger seal for ZERO wear.
  
• Adjustable seat height to minimize lift for optimum response to PW.
  
• Our rapid response coil for instant reaction to PWM, essential for progressive power.
  
  Parts Included:
  
• A pair of billet alloy Pulsoids with SS fittings and laser cut mounting plates.
  
• Jets (only 2 initial jets that range per application).
  
• 1 x 5 lb. bottle w/ maxflow valve(bottle shipped empty).
  
• Extruded alloy bottle bracket w/ stainless steel straps.
  
• Throttle microswitch w/ bracket. TPS available for an extra charge.
  
• 5m of 5mm high pressure nylon nitrous supply line.
  
• Nylon fuel pulsoid supply pipe.
  
• Nylon supply lines from pulsoids to injector.
  
• Fuel adapter, varies per application.
  
• Backing nuts and olives for nylon lines.
  
• Crossfire injector (spacer & retainers).
  
• Arming switch w/ aircraft style cover.
  
• Electrical connectors & wire pack.
  
• Fitting instructions & stickers.
  
  Note: Nos System Comes standard with 5mm O.D. high pressure nylon nitrous supply pipe that doesn't require a purge as internal pipe dimensions are flow matched and gaseous nitrous is kept to a minimum. Braided is available in the lower drop-down menu but a purge is recommended for optimal performance.
  
• Note: These systems have the potential to increase the power of your motor up to 150 horsepower by upgrading the standard components supplied with the kit, obviousley each motor varies on power output capabilities depending on many factors, so may be more or less than 150 bhp.

Important: Our pulsoids are uniquely designed and built for optimum efficiency. As shown in the image below you will notice very important design features compared to the majority of standard nitrous solenoids on the market today.

. Our pulsoids have a very simple 90 degree flow path from side inlet to bottom outlet as you can see with the dark purple, red, and dark red areas.
. Our pulsoids have a very minimal internal reservoir area compared to the competitors as shown in the light purple areas which reduces the chance of phase change and loss of density.

Please read each kit description for more details on parts included. Contact us about any questions, if you don't see a kit listed that suites your needs call us for support on 0870 870 7890.

A fitting service is available Ideal if you live within the following areas, Birmingham, Tamworth, Coventry, Solihul, Nuneaton, Redditch, Kenilworth, Lichfield and surrounding areas.

Nitrous Systems - The Nitrous system SB100i below is the most common kit require but if yiou are unsure then please call us on 0870 870 7890 for assistance.

SB100i Nitrous System
SB100i2 Nitrous System
SB100i4 Nitrous System
SB100i6 Nitrous System
SB100i8 Nitrous System
Nitrous Upgrade Kit

Nitrous Oxide ( Nos ) Systems

Car Nitrous Oxide System ( NOS Kit )
MotorBike Nitrous Oxide System ( NOS Kit )

Nitrous Oxide Kits - Upgrades - Accessories

Direct Port Upgrade Kits
Progressive Controllers
Pulsoids - Solonoids
Distribution Blocks
Bottles, Valves & Related
Gauges
Purge C02 Kits
Nitrous Fuel Lines
Metric Fittings & Adapters
Injectors
Metering Jets
Electrical Switches

Nitrous Oxide ( Nos ) Information

Nitrous Oxide Fitting Instructions
Nitrous Oxide Book - All you need to know about NOS
Nitrous Oxide Bottle Heaters
Nitrous Oxide FAQ's - What you need to know
Nitrous Oxide - What is it?

Nitrous Oxide Kits Home

Also see links below for alternate Automotive Accessories